Flux V1 valve controller¶
From a new Flux V1 board to its examples running, and where to read next.
Valve controller board
Flux V1
HardFOC
- MCU
- ESP32-S3
- Solenoid drivers
- TLE92466ED (six low-side channels), MAX22200 (eight channels)
- Valves
- On/off and proportional solenoid channels
- Firmware
- ESP-IDF 5.5, FreeRTOS, C++
Path¶
- Bring the board up with the HAL. The HAL quickstart installs ESP-IDF, builds an example and reads its log.
- Check the hardware. The pin map and the bring-up guide.
- Drive the valves. The ValveManager page and the examples.
The product firmware, hardfoc-flux-v1, is a private repository. Its documentation is built in CI as an artifact
for people with access, and is not published here.
Documentation¶
| Site | What it covers |
|---|---|
| hf-hal-flux-v1 | The board: hardware, pin map, managers (valves, ADC, GPIO, LEDs, temperature, NVS, comms), examples |
| hf-tle92466ed-driver | The six-channel solenoid driver |
| hf-max22200-driver | The eight-channel solenoid driver |
| hf-core | The shared core the HAL is built on |