Bit positions within SWn_CTRL (e.g. 0x35 / 0x3B / 0x41).
More...
#include <pf1550_registers.hpp>
|
| static constexpr uint8_t | kEn = 1u << 0 |
| | SW_EN — enable in RUN.
|
| |
| static constexpr uint8_t | kStbyEn = 1u << 1 |
| | SW_STBY_EN — enable in STANDBY.
|
| |
| static constexpr uint8_t | kOMode = 1u << 2 |
| | SW_OMODE — enable in SLEEP.
|
| |
| static constexpr uint8_t | kLpwr = 1u << 3 |
| | SW_LPWR — low-power during STBY/SLP.
|
| |
| static constexpr uint8_t | kDvsSpeed = 1u << 4 |
| | SW_DVSSPEED — slow DVS slew.
|
| |
| static constexpr uint8_t | kFpwmInDvs = 1u << 5 |
| | SW_FPWM_IN_DVS — CCM during DVS-down.
|
| |
| static constexpr uint8_t | kFpwm = 1u << 6 |
| | SW_FPWM — force CCM.
|
| |
| static constexpr uint8_t | kRdisEnb = 1u << 7 |
| | SW_RDIS_ENB — disable discharge resistor.
|
| |
Bit positions within SWn_CTRL (e.g. 0x35 / 0x3B / 0x41).
Used so callers can build a control byte without magic numbers:
static constexpr uint8_t kStbyEn
SW_STBY_EN — enable in STANDBY.
Definition pf1550_registers.hpp:294
static constexpr uint8_t kLpwr
SW_LPWR — low-power during STBY/SLP.
Definition pf1550_registers.hpp:296
static constexpr uint8_t kOMode
SW_OMODE — enable in SLEEP.
Definition pf1550_registers.hpp:295
static constexpr uint8_t kEn
SW_EN — enable in RUN.
Definition pf1550_registers.hpp:293
◆ kDvsSpeed
| constexpr uint8_t pf1550::SwCtrlBits::kDvsSpeed = 1u << 4 |
|
staticconstexpr |
SW_DVSSPEED — slow DVS slew.
◆ kEn
| constexpr uint8_t pf1550::SwCtrlBits::kEn = 1u << 0 |
|
staticconstexpr |
◆ kFpwm
| constexpr uint8_t pf1550::SwCtrlBits::kFpwm = 1u << 6 |
|
staticconstexpr |
◆ kFpwmInDvs
| constexpr uint8_t pf1550::SwCtrlBits::kFpwmInDvs = 1u << 5 |
|
staticconstexpr |
SW_FPWM_IN_DVS — CCM during DVS-down.
◆ kLpwr
| constexpr uint8_t pf1550::SwCtrlBits::kLpwr = 1u << 3 |
|
staticconstexpr |
SW_LPWR — low-power during STBY/SLP.
◆ kOMode
| constexpr uint8_t pf1550::SwCtrlBits::kOMode = 1u << 2 |
|
staticconstexpr |
SW_OMODE — enable in SLEEP.
◆ kRdisEnb
| constexpr uint8_t pf1550::SwCtrlBits::kRdisEnb = 1u << 7 |
|
staticconstexpr |
SW_RDIS_ENB — disable discharge resistor.
◆ kStbyEn
| constexpr uint8_t pf1550::SwCtrlBits::kStbyEn = 1u << 1 |
|
staticconstexpr |
SW_STBY_EN — enable in STANDBY.
The documentation for this struct was generated from the following file: