#include <rmt_wrapper.hpp>
|
| | RmtRx (gpio_num_t gpio, uint32_t resolution_hz=10 '000 '000, size_t mem_symbols=64, uint32_t idle_threshold_us=1000, uint32_t filter_ns=200, rmt_clock_source_t clk_src=RMT_CLK_SRC_DEFAULT, int channel_id=-1) |
| |
| | RmtRx (const RmtRx &)=delete |
| |
| RmtRx & | operator= (const RmtRx &)=delete |
| |
| | RmtRx (RmtRx &&o) noexcept |
| |
| RmtRx & | operator= (RmtRx &&o) noexcept |
| |
| | ~RmtRx () |
| |
| esp_err_t | receive (rmt_symbol_word_t *buffer, size_t buffer_symbols, size_t *out_symbols, TickType_t timeout=portMAX_DELAY) |
| | Start a single receive transaction and block until it completes.
|
| |
| rmt_channel_handle_t | handle () const |
| |
◆ RmtRx() [1/3]
| ws2812::RmtRx::RmtRx |
( |
gpio_num_t |
gpio, |
|
|
uint32_t |
resolution_hz = 10'000'000, |
|
|
size_t |
mem_symbols = 64, |
|
|
uint32_t |
idle_threshold_us = 1000, |
|
|
uint32_t |
filter_ns = 200, |
|
|
rmt_clock_source_t |
clk_src = RMT_CLK_SRC_DEFAULT, |
|
|
int |
channel_id = -1 |
|
) |
| |
|
inlineexplicit |
◆ RmtRx() [2/3]
| ws2812::RmtRx::RmtRx |
( |
const RmtRx & |
| ) |
|
|
delete |
◆ RmtRx() [3/3]
| ws2812::RmtRx::RmtRx |
( |
RmtRx && |
o | ) |
|
|
inlinenoexcept |
◆ ~RmtRx()
| ws2812::RmtRx::~RmtRx |
( |
| ) |
|
|
inline |
◆ handle()
| rmt_channel_handle_t ws2812::RmtRx::handle |
( |
| ) |
const |
|
inline |
◆ operator=() [1/2]
| RmtRx & ws2812::RmtRx::operator= |
( |
const RmtRx & |
| ) |
|
|
delete |
◆ operator=() [2/2]
◆ receive()
| esp_err_t ws2812::RmtRx::receive |
( |
rmt_symbol_word_t * |
buffer, |
|
|
size_t |
buffer_symbols, |
|
|
size_t * |
out_symbols, |
|
|
TickType_t |
timeout = portMAX_DELAY |
|
) |
| |
|
inline |
Start a single receive transaction and block until it completes.
The caller must provide a buffer sized to hold buffer_symbols symbols.
The documentation for this class was generated from the following file:
