tle92466ed::ChannelConfig Struct Reference

Channel configuration structure. More...

#include <tle92466ed.hpp>

Public Attributes
ChannelMode	mode {ChannelMode::ICC}
	Channel operation mode.
uint16_t	current_setpoint_ma {0}
	Current setpoint in mA (0-2000 or 0-4000)
SlewRate	slew_rate {SlewRate::MEDIUM_2V5_US}
	Output slew rate.
DiagCurrent	diag_current {DiagCurrent::I_80UA}
	OFF-state diagnostic current.
uint8_t	open_load_threshold {3}
	OL threshold (0=disabled, 1-7 = 1/8 to 7/8)
uint16_t	pwm_period_mantissa {0}
	PWM period mantissa.
uint8_t	pwm_period_exponent {0}
	PWM period exponent.
bool	auto_limit_disabled {false}
	Disable auto-limit feature.
bool	olsg_warning_enabled {false}
	Enable OLSG warning.
uint8_t	min_int_thresh {CH_CTRL_REG::MIN_INT_THRESH_FLOOR}
bool	pwm_period_calc_mode {false}
	Ignore falling dither slopes in the PWM period controller (§4.6.2.3).
bool	deep_dither_enabled {false}
	Enable deep dither.
uint16_t	dither_step_size {0}
	Dither amplitude step size.
uint8_t	dither_steps {0}
	Number of dither steps.
uint8_t	dither_flat {0}
	Flat period steps.

Detailed Description

Channel configuration structure.

Contains all configurable parameters for an output channel.

Member Data Documentation

auto_limit_disabled

bool tle92466ed::ChannelConfig::auto_limit_disabled {false}

Disable auto-limit feature.

current_setpoint_ma

uint16_t tle92466ed::ChannelConfig::current_setpoint_ma {0}

Current setpoint in mA (0-2000 or 0-4000)

deep_dither_enabled

bool tle92466ed::ChannelConfig::deep_dither_enabled {false}

Enable deep dither.

diag_current

DiagCurrent tle92466ed::ChannelConfig::diag_current {DiagCurrent::I_80UA}

OFF-state diagnostic current.

dither_flat

uint8_t tle92466ed::ChannelConfig::dither_flat {0}

Flat period steps.

dither_step_size

uint16_t tle92466ed::ChannelConfig::dither_step_size {0}

Dither amplitude step size.

dither_steps

uint8_t tle92466ed::ChannelConfig::dither_steps {0}

Number of dither steps.

min_int_thresh

uint8_t tle92466ed::ChannelConfig::min_int_thresh {CH_CTRL_REG::MIN_INT_THRESH_FLOOR}

Minimum ICC integrator threshold (CTRL.MIN_INT_THRESH). Defaults to the datasheet §4.6.2.4 floor rather than the POR value of 0: at 0 the effective threshold can go negative and the power stage stops switching while the channel still reports enabled with its setpoint intact.

mode

ChannelMode tle92466ed::ChannelConfig::mode {ChannelMode::ICC}

Channel operation mode.

olsg_warning_enabled

bool tle92466ed::ChannelConfig::olsg_warning_enabled {false}

Enable OLSG warning.

open_load_threshold

uint8_t tle92466ed::ChannelConfig::open_load_threshold {3}

OL threshold (0=disabled, 1-7 = 1/8 to 7/8)

pwm_period_calc_mode

bool tle92466ed::ChannelConfig::pwm_period_calc_mode {false}

Ignore falling dither slopes in the PWM period controller (§4.6.2.3).

pwm_period_exponent

uint8_t tle92466ed::ChannelConfig::pwm_period_exponent {0}

PWM period exponent.

pwm_period_mantissa

uint16_t tle92466ed::ChannelConfig::pwm_period_mantissa {0}

PWM period mantissa.

slew_rate

SlewRate tle92466ed::ChannelConfig::slew_rate {SlewRate::MEDIUM_2V5_US}

Output slew rate.

---

The documentation for this struct was generated from the following file:

• inc/tle92466ed.hpp